Vehicle Mounted Handheld Signal Jammer 5W Sending Power Large Coverage

Hand-held 3 bands vehicle-mounted car GPS GSM DCS jammer mobile Handheld Signale Jammer

Product Introduction:

Most of the vehicles on the market are now equipped with GPS vehicle locators to reveal our whereabouts.To prevent individuals and vehicles from being tracked, it is necessary to start with a small, easy-to-carry and shielded shield.To this end, our company, in the context of fully understanding the needs of customers, combined with foreign technical design to produce this hand-held shield.It has good shielding effect on cart and cart!Whether it's a truck-truck truck truck or a unit car, it's your choice.Using this mask, the platform only shows the vehicle is still, not off line, no loss!

Product Fetures:

1. Effective prevention of GPS satellite tracking.
2. Effectively interfere with GPS satellite signal, protect your whereabouts privacy and information secret.
3. Interferes with all GPS satellite positioning signals currently.
4. It does not affect the normal use of mobile phones or other electronic devices at work.
5. Small size, large power, light weight, large coverage, convenient to carry.
6. Small volume,easy to carry;
7. Battery life 2-3 hours.

Product  Applications:

1. A vehicle equipped with GPS positioning or navigation.
2. Party government or state key secret place.
3. Business secret places.
4. Individuals who need to be prevented from following.

Product Specification:

Product Image:

FAQ:

Why is there still a signal on the phone's signal indicator when it works?
A: It's just an illusion.In fact, the mobile phone has been unable to communicate.When you press the pull button, you will find that there is no signal on the signal indicator.The cell phone signal shield will not interfere with the normal work of other electronic devices. The antenna should be installed on the corresponding signs of each channel on the host, and then connected to the host power supply.

The effective coverage of the shield is a circular area centered around the shield, so be careful to choose the location of the shield so as to avoid blocking the dead Angle?
A: No.This is because the electromagnetic signal emitted by the cell phone's signal shield is completely within the country's mobile operating band, which only blocks mobile communication.And this signal is always in a relatively static state, and will not affect any electronic equipment.

Are cell phone signal Jammer harmful to people and mobile phones?
A: Please rest assured that the electromagnetic signal intensity emitted by the cell phone signal Jammer is very weak. The test data indicates that this signal strength is far from harmful to the human body.At the same time, the mobile phone signal shield is just blocking the forward signal of the phone, so that the cell phone cannot be connected with the base station, so there will be no damage to the phone itself.

Is there any difference between the effective shielding distance of the mobile phone signal shield in indoor and outdoor use?
A: There are.The effective shielding distance (30-40 meters) of the cell phone signal shield is generally referred to as indoor distance.In open areas, the effective distance of shielding can be several hundred meters.It should be noted, whether they are within the room, or in outdoor use, effective shielding effect of shielding distance has relationship with environmental conditions, such as from the base station near and far, placed, etc.Therefore, when using cell phone signal shield, this factor should be fully taken into account to avoid blocking the dead Angle and thus affect the shielding effect.

Is the cellular signal shield the same for GSM mobile phones and CDMA mobile phones?
A: that's a good question.Because CDMA mobile phone's anti-interference performance is far superior to that of GSM mobile phone, the effective shielding distance for CDMA mobile phone is smaller than that of GSM mobile phone, but the difference is not very large, about 2-4 meters.But it also reminds users to pay attention to some particularly important sites, and should increase the number of mobile phone signal blockers when necessary to ensure the shielding effect of CDMA mobile phones.

After working for a period of time, the mobile phone signal mask is hot. Will working long hours damage the machine?
A: thank you for your care. This is a normal phenomenon.In the design, we use the thermal conductivity of aluminum alloy to assist the heat dissipation.This can guarantee long time stable work.As a result, the machine will not damage the machine.