Payment & Shipping Terms:
|Product Name:||High Power Signal Jammer||Power Supply:||Input DC28V|
|Total RF Power:||Up To 110W||Dimensions:||450 X 350 X190 Mm|
|Frequency Band:||1-4 Channel||Weight:||27kg(Main Engine)|
|Antennas:||4pcs Omni Antennas||Jamming Range:||0-30 Meters|
110W 20MHz - 6GHz Full Band Vehicle mounted High Power Signal Jammer , Mobile Network Jammer Device for Military
This High Power Full-band vehicle-mounted Mobile signal Jammer is our factory that uses advanced foreign technology, mainly aimed at the border, military, prisons, large gathering place in unsafe hidden danger brought by the mobile phone, According to the actual situation of mobile communication at home and abroad, carefully developed high-tech products, it can be 0-30 meters in radius range (Jamming GSM/CDMA/DCS/PHS / 3G / 4 G,etc. Cell phone signals). Makes the phone impossible to play and answer, the wireless signal is cut off, but does not interfere with the work of other electronic devices.
1. All cell phone signals can be blocked.
2. Only block the downlink signal of the mobile phone, not interfere with the base station.
3. Imported devices, slow start circuit design can avoid the ignition phenomenon caused by mechanical switch, and the integration degree is high and stable.
4. Multiplex regulation, each section can be enabled or closed separately.
5. Car power supply, easy to follow
6. Perfect self-protection function. When the device is warned of overheating fault, the shielding device will automatically shut down the failed module to avoid the damage of the shielding device.
1. Carefully open the packing cases, will open the packing cases, keep, for future move or carry, check whether the open project in good condition, if it is found that the existing any loss, damage or missing parts, please contact your dealer.
2. After connecting all wires and antennas, please directly turn on the power supply of the host machine.At this point, the host works by default for maximum power output.To shut down the machine, please turn off each switch of the shield first, and wait 5-10 minutes before turning off the main power of the machine, so that the shield will stop working.
|2||Power Line||1||pcs||Vehicular Standard|
|No.||Technical Standard||Technical Parameters|
|1||CH1||20MHz - 90MHz||40W|
|2||CH2||90MHz - 500 MHz||40W|
|3||CH3||500MHz - 2000 MHz||20W|
|4||CH4||2000MHz - 6000MHz||10W|
|5||Total RF Power||Up to 110W|
|6||Power Supply||Input DC28V|
|7||Dimension||450 x 350 x190 mm|
|8||Net Weight||27kg(Main Engine)|
|9||Jamming Range||0-30 meters|
|10||Action Type||All mobie Phones(2G+3G+4G),4G wifi signal, interphone, etc.|
|11||Temperature||-10 ~ 55℃|
|12||Relative Humidity||≤90% (RH)|
|14||Positon||In the car|
Tag: Full Band Vehicle mounted High Power Signal Jammer for Military explosion - proof.