Payment & Shipping Terms:
|Product Name:||Handheld Wifi Signale Jammer||Sending Power:||5W|
|Power Supply:||110-240VDC+4.5V||Dimensions:||95x45x20 Mm|
|Net Weight:||0.36kgs||Bands:||3 Bands|
Wifi Handheld Signal Jammer,
Vehicle Mounted Handheld Signal Jammer,
ODM handheld drone jammer
Hand-held 3 bands vehicle-mounted car CDMD GSM DCS jammer mobile Handheld Signale Jammer
|Type of action device.||Satellite navigation, tracking and so on.|
|Maximum radiation power (1 m, dipole antenna test)||Under -10dBm|
|Transmitting Frequency||CDMD/GSM DCS GPS|
|Power Range||33dBm 6dBm/30KHz (min)|
|Effective Coverage Range(jamming radiuss)||2--15m|
Is there any difference between the effective shielding distance of the mobile phone signal shield in indoor and outdoor use?
A: There are.The effective shielding distance (30-40 meters) of the cell phone signal shield is generally referred to as indoor distance.In open areas, the effective distance of shielding can be several hundred meters.It should be noted, whether they are within the room, or in outdoor use, effective shielding effect of shielding distance has relationship with environmental conditions, such as from the base station near and far, placed, etc.Therefore, when using cell phone signal shield, this factor should be fully taken into account to avoid blocking the dead Angle and thus affect the shielding effect.
Is the cellular signal shield the same for GSM mobile phones and CDMA mobile phones?
A: that's a good question.Because CDMA mobile phone's anti-interference performance is far superior to that of GSM mobile phone, the effective shielding distance for CDMA mobile phone is smaller than that of GSM mobile phone, but the difference is not very large, about 2-4 meters.But it also reminds users to pay attention to some particularly important sites, and should increase the number of mobile phone signal blockers when necessary to ensure the shielding effect of CDMA mobile phones.
After working for a period of time, the mobile phone signal mask is hot. Will working long hours damage the machine?
A: thank you for your care. This is a normal phenomenon.In the design, we use the thermal conductivity of aluminum alloy to assist the heat dissipation.This can guarantee long time stable work.As a result, the machine will not damage the machine.
1: All in one with 20 chancel design, Customized for special frequency range
2: High output power, Total up to: 45W , jamming up to 40m (Still depends on the strength signal in given area)
3: External Omni-directional antennas all the TX frequency covered down link only
4: With Car storage battery Charger DC12V can be used in car
5: Built-in good cooling system inside, Working non-stopped
6: Can adjust or turn off any single band without influencing the other bands operation
7: Independent module design with frequency source of each channel, easy maintenance (if have any damaged frequency band, replace with new PCB directly, no need for professional equipment such as frequency analyzer)
8: 2-5meters with Infrared Remote Control Turn ON /OFF Power
Contact Person: sales