Product Details
Place of Origin: China
Brand Name: VBE
Model Number: VBE-4ODM
Payment & Shipping Terms
Minimum Order Quantity: 1Set
Supply Ability: 5000Set
The VBE Illegal Mobile Phone Signal Intelligent-Detection and Auto-Interception System detects and automatically intercepts mobile communication terminals across all 2G/3G/4G systems (including GSM, CDMA, WCDMA, CDMA2000, TD-LTE, FDD-LTE) within controlled areas. This advanced system addresses limitations of conventional signal jammers such as excessive radiation, poor performance, surrounding interference, and single-function jamming, providing an effective mobile phone detection and intelligent jamming solution for controlled environments.
| Jamming Frequency | 700-6000MHz ranges selectable (custom frequencies available) |
| Jamming Targets | Toy remote control, car remote control, pager, walkie-talkie, CDMA, GSM, DCS, PHS, 3G, Wi-Fi |
| Jamming Distance | 50-500m (depending on environment and signal strength) |
| Remote Control | Wire control panel available (optional) |
| RF Output Power | Up to 100W |
| Power Supply | 220V AC, 24/48V DC battery (optional) |
| Continuous Working Hours | Long time (220V AC), 2 hours by battery, rechargeable |
| Antenna Type | High-gain omni antennas |
| Main Equipment Dimensions | 630*390*210mm |
| Main Equipment Weight | 5kg |
| Operating Temperature | -20°C to +50°C |
| Humidity | 5-95% |
Our company develops a comprehensive centralized monitoring system that enables simultaneous monitoring of all connected devices via internet connection.
When connected to a public network monitoring server, you can monitor all online devices from anywhere in the world, providing real-time monitoring of devices in any global location.
All online device parameters and operating states display on system interfaces in real time, including output power, working temperature, operation status (normal/abnormal), and device connectivity (online/offline).
System interfaces allow modification of device working parameters as needed, including increasing or decreasing output power, and turning on/off signal output for all or specific frequency bands - with real-time device response.
When devices generate failure alarms (standing wave alert, low power alarm, over-temperature alarm, etc.), the monitoring system highlights them in red and provides detailed alarm information, facilitating prompt maintenance by system administrators and engineering personnel.